| Homepage | Français | Italiano |          

MesitITMS

MesitITMS give you a control and data setting possible both at tank top and tank side, no special additional equipment such as HHC (hand held terminal) is required for control and data setting, control and setting possible in hazardous area without turning off the system. MesitITMS’s Function advantages control mode are:

1) specifying of measuring object: a) liquid surface, b) liquid interface, c) tank fbottom (sludge level), d) density measurement mode

2) displacer control hoisting up, hoisting down and displacer stop

3) wave mode

Built-in explosion proof key board offers easy data setting and operation.  All operation parameters and operation commands can be given to FW-9000 without turning off the power supply. Hand held terminal which is often observed with servo operated tank gauges of other makers is not necessary.

Measuring method is micro processor based with servo balanced type.

Measuring range max. 50 m (special 100 m)

Operating pressure 30 kg/cm2g

Ambient temperature -2 to 70 ℃

Temperature in tanks max. 200 ℃

Instrument accuracy level +/- 1 mm temp +/- 0.3℃ density +/- 0.005 g/cm3

Local indication red colour, high brightness 3 line led

Connection st’d 3” ~ 6”

Output signal bcd, open collecter,  4-20 ma

Enclosure ip 65 exd II ct6

Power supply AC 100, 110, 115, 120, 200, 220, 230, 240 v 50/60 Hz

The parameter setting mode have: 1) pass word, 2) lower and upper limit, 3) indication adjusting, 4) tank deformation adjusting, 5) level shift adjusting, 6) servo motor pid mode, 7) wave mode parameters, 8) alarm setting (total 16 points), 9) temperature element parameters.

FW-9000 series servo type level gauge

Dir-110/120 tank side indicator by high brightness red color led 3 lines. 1st line 7 segment 4 digit (height 7mm) temp. indication (0.1 ℃ unit), 2nd line 7 segment 4 digit (height 7mm) level indication (0.1mm unit) and 3rd line 14 segment 2 digit (height 16mm) operation status, alarm status.

FW-9000 is provided with 3 lines, large size, red colour led indication which is easily observed even at night or in dark places: line 1 temperature indication in 0.1℃ unit, line 2 level indication in 0.1mm unit and line 3 status indication in 2 digits.